Fit the wireless hardware
Mount the receiver on the excavator stick and fit the tilt sensor. There are no wiring harnesses to run across the machine.
FOR OWNER-OPERATORS & CONTRACTORS
Know your depth.
Stay on grade. No machine wiring.
Wireless 3D excavator guidance that shows your bucket position, dig depth, and site plans right inside the cab.
Available to order
Continue to Terrain Pilot's secure checkout. Shipping calculated there.
📦 Delivery Information: Depending on stock availability at the time of your order, delivery may take an additional 1–2 weeks.
Not sure it suits your machine? Check with our team
LESS COMPLICATION. MORE DIGGING.
The X5 helps you see where your bucket is in relation to the job's target depth or slope, so you can make informed cuts as you work.
Mount the receiver on the excavator stick and fit the tilt sensor. There are no wiring harnesses to run across the machine.
The hardware communicates over Bluetooth and Wi-Fi. Set up your machine and confirm your display and correction service with our team.
Import your CAD plan or use depth and slope guidance. View bucket position and cut/fill information from the operator's seat.
THE X5 PACK
Main guidance hardware, mounting components, and installation accessories in one pack.
1 wireless RTK receiver, including free CORS correction service.
1 solar-assisted tilt sensor and sensor base with M4 screws.
Main unit mount, 2 magnets, center bolt, clamp, and extension rod.
Adhesive pads, 3m tape measure and glue.
IS THE X5 RIGHT FOR YOU?
A practical choice for owner-operators and contractors who want core grade guidance and the flexibility to move between machines.
Need off-grid radio corrections or advanced road design guidance? Ask about the X7 or D200.
| Receiver | 1 wireless, stick-mounted RTK unit |
| Battery | Up to 18 hours of receiver operation |
| Tilt sensor | Wireless, solar-assisted charging |
| Connection | Bluetooth and Wi-Fi to cab display |
| Guidance | Depth, slope, and basic leveling |
| Site drawings | 2D/3D CAD import and viewing |
BEFORE YOU BUY
It shows your bucket position and the difference between your current cut and the target grade on a cab display. You operate the machine; the X5 provides visual guidance for depth, slope, and leveling.
No. The receiver and sensor use wireless communication with the cab display. The X5 is designed to be installed without complicated wiring harnesses or welding and moved between machines.
The published X5 pack contents do not list a cab display. Before ordering, contact the team to confirm the display you need, software setup, and any additional costs.
CORS is a correction service used by the RTK receiver for positioning. CORS access is free.
Shipping is calculated in the Terrain Pilot checkout. Contact the team for current dispatch and delivery estimates for your location before placing an order.
Yes. Contact Terrain Pilot with your machine model, typical jobs, and work locations. The team can confirm compatibility and help compare the X5 with the X7 and D200.
Terrain Pilot X5 · $4,983.88 AUD